Hot Weather Concreting

Pouring concrete in hot weather is a tricky endeavor. We all know that summer is the ideal time for construction projects. Managers and crews begin the season eager to maximize the longer daylight hours and the warmer weather. With the threat of fall and winter looming, the clock is ticking all summer to accomplish as much as possible. It is true that fewer concrete problems exist during the summer. However, excessively hot temperatures can cause problems as well.

 concrete

Hot Weather Concrete Problems

When the summer months get really hot, it can be a little too much of a good thing. In fact, concrete cures best in a range between 70° to 80° F. As your temperature approaches 90° F, however, you’ll start to run into problems. “Hot weather” is more than just temperature. Days of low relative humidity as well as days with high wind speeds also are grouped into “hot weather.”

Finishing Difficulty

Concrete sets much faster on hot weather days, making it very difficult to level and finish smoothly before it becomes set. Your finished slab is more likely to have surface deformities and unevenness unless precautions are taken.

Decreased Setting Time

Freshly poured, fluid concrete mixtures can be molded with strategically spaced control joints.  These joints help control random cracking as the material hardens and shrinks. During hot weather, your mix sets much quicker and there is less time to place these joints correctly.

Reduced Strength

Your slab becomes set during the hydration process, when water is absorbed and crystals are formed. Cooler concrete takes more time to hydrate and has more time for these crystals to form and strengthen. In hot weather conditions, this process is truncated and the mix has less time to hydrate, form crystals, and set to a strong compressive strength. Because of this, hot weather concrete is more likely to suffer decreased strength and durability.

Increased Cracking Risk

Hot weather, wind, and dry conditions all lead to an increase of evaporation. These environmental factors pose a real threat to the top layer of your slab. As water is leached out of the surface layer by evaporation, the mix can become too dry and is more susceptible to surface cracking.

Drying Shrinkage

Even under normal conditions, the volume of a wet slab will be different than that of a dry slab. This volume change is even greater when pouring concrete in hot weather. Increased evaporation is the biggest culprit behind the shrinkage of a slab. The temptation to add more water to a mixture can also create shrinkage. The wetter a mix is, the greater the volume change when set.

Hot Weather Concreting Tips

Dampen Your Subgrade

During a pour, water is immediately leached out of your concrete and into the surface you are pouring on top of.  Lightly hydrating the surface before you pour can help keep moisture in your mix during the hydration process.

Time Your Pour

During hot conditions, pours should be scheduled during the coolest part of the day. Most likely this time frame will fall in the morning hours. If your concrete is being mixed off-site and then delivered, make sure you avoid timing your deliveries during peak heat.

Chill Your Water

Chilled water can reduce concrete temperature by up to 10° F. Having an industrial chiller on hand to chill your water before mixing will give you a great advantage over mother nature.

Admixtures

Concrete admixtures can greatly improve the strength, manageability, setting time, and quality of your mix.  Consider using hot weather admixtures, like recycled plastic additives, that will make your mix easier to work with, and increase its setting time so it can cure to a greater strength.

Reduce Mixing Time

Once water has been added to the mix, reduce your mixing time. Over-mixing will create more water loss through evaporation.

All Hands On Deck

Schedule your crews so that you have as many hands as possible when pouring in hot weather. Due to faster set times, you will need as much manpower as possible to place forms, prep your sub-grade, smooth, set control joints, and level while your mix is still workable.

Use Sunshades and Windbreaks

Closely monitor sun patterns and wind forecasts so you can keep your concrete protected from the elements. Placing sunshades and windbreaks can greatly decrease the threat of evaporation and give your slab more time during the hydration process.

Powerblanket Concrete Solutions

Powerblanket specializes in total temperature control. It is critical during temperature sensitive endeavors like concreting, to have the tools on hand to keep your temperatures where they belong. Learn more about using concrete blankets during the winter here, or process cooling during the summer with North Slope Chillers.

No matter the temperature, the Powerblanket family has your concrete needs covered. Contact us to find the perfect concrete solution for your needs 866.957.5538 or [email protected]

Cure your concrete faster and better in cold weather conditions with Powerblanket.


TITLE

Shelby Thompson

Shelby Thompson is the head of standard product sales for Powerblanket. He has a distinguished military career, having served in both Afghanistan and Iraq. In his time in the Marines, Shelby acquired an impressive skillset that he now uses in his current role. When he's not working, Shelby loves spending time outdoors with his wife, son, and daughter. He is also a semi-keen hunter, fair weather fisherman, and shooter. Unfortunately, Shelby also has something of an unlucky streak when it comes to Fantasy Football at the company.



Leave a Reply

Your email address will not be published. Required fields are marked *

preloader