When is it too cold to roof? It really is too cold to roof when you are outside and you can see your breath. Many roofing products have adhesive properties that require the sun’s radiant heat for activation. You risk a faulty roof install if you do not pay attention to the temperature outside. Continue reading for specific cold weather roofing tips.
The ideal temperature range to install asphalt shingles is between 70 and 80 degrees Fahrenheit (21 and 27 degrees Celsius). Below 70° F and the adhesive will not reach the ideal elasticity and will not create a perfect seal. Temperatures warmer than 80 degrees can be problematic in the other direction. Asphalt shingles can become overly pliable and are susceptible to damage during installation. Installers are more likely to overdrive roofing nails, and foot traffic can er
ode the protective granular layer quite easily in extremely warm temperatures.
If winter installation is unavoidable, most asphalt shingle manufacturers require a specialized adhesive manually applied to each shingle for temperatures below 40° F (4 degrees Celsius). If shingles are applied below 40° without the specialized adhesive, you risk a voided warranty.
EPDM (rubber) membrane roofing is even more temperature sensitive than asphalt (composition) shingles. EPDM is joined together using an extensive amount of adhesive that requires high temperatures to be pliable enough to install and cure. EPDM adhesive is very thick and hard to work with even at high temperatures. How cold is too cold to install a new roof? Manufacturers recommend temperatures be above 45° F (7 degrees Celsius) for installation. When the weather is too cool to roof, that recommended temperature is not very practical unless a warm storage area is made available to keep the adhesive warm until the moment it is used.
WHEN IS IT TOO COLD TO ROOF? POWERBLANKET HAS A SOLUTION
Powerblanket has a solution for cold weather roofing needs. The Powerblanket® Hot Box will maintain the desired temperature of your shingles and/or adhesive on site, making the cold weather install much easier. While winter roofing is not ideal, Powerblanket makes it much easier than it has been in the past.
Powerblanket Hot Boxes saves you money by keeping your products from freezing without the risk of overheating. The Hot Box pallet warmer can be easily assembled, taken apart, and reassembled. Hot boxes are ideal for cold weather storage, freeze protection, transporting, job site heating, remote location use, and winter roofing. Standard Hot Boxes hold product between 100°F and 120°F (38°C and 49°C) and optional adjustable thermostatic controllers allow temperatures to be precisely controlled.
- Preserve temperature sensitive material.
- Access doors on two sides.
- Assemble quickly and easily.
- Heat materials and palletized products: adhesives, shingles, paint, caulk, resins and epoxies, etc.
- Certified to UL and CSA standards.