If you’re in the business of concrete, then you know that winter poses the most complications when it comes to proper concrete curing. However, you’ll be equally aware of the fact that summertime also has its challenges.
Sure, winter is a far more difficult time to deal with when pouring concrete. Proper curing involves ideal temperatures, and winter imposes on these ranges more than any other season. That’s why when it comes to pouring concrete in winter, you need the assistance of a good concrete curing blanket. But what can be done to counter the challenges of summer, and what are those primary challenges?
In the summer months, you don’t have to worry about freezing temperatures. Instead, you need to watch for levels of relative humidity, temperature fluctuations between night and day hours, and an increase in the water demand for concrete curing. With these factors to consider, careful monitoring of the concrete is still an important element of the job. Hotter temperature and low humidity can increase the need for additional water, and large fluctuations between the daytime and evening temperature can pose significant problems too.
If there is the risk of a rapid drop in temperature, then there is the risk that your concrete could crack. Even though the temperature may be ideal for curing during the day, that doesn’t mean it will be at night. Certain regions can experience significant temperature variances between daytime and evening hours, and these variances should be considered potentially problematic.
Using a Concrete Curing Blanket in the Summer?
It may seem a bit of a stretch to suggest the use of a curing blanket during the summer months, but the reality of the situation is that it can be a very reasonable call. Think about the potential scenario of dropping temperatures at night. If your concrete is curing well during the heat of the day, and then experiences a drastic drop in temperature at night, then it’s going to affect the cure and even cause potential cracking.
Using a concrete curing blanket at night would allow you to regulate the temperature range even if it’s dropping. This would produce a more uniform cure and would also speed up the process significantly. The blanket likely wouldn’t be needed during the day, but applying it at night could greatly decrease the fail rate of an expensive and time consuming project.