has rows

PowerPro Screw Plug Immersion Heaters by Powerblanket

Screw plug immersion heaters are used to heat a variety of liquids and gasses. They can be mounted in a tank or inside a vessel through an NPT connection. Waters and oils are the most common products heated in screw plug applications. Screw plug immersion heaters can safely add heat to your process within a hazardous rated area as all PowerPro heaters have hazardous area approvals that allow them to be installed in a variety of hazardous classified areas such as Class 1 Div 1 and Div 2, as well as IECex and ATEX required designs. . Units can be controlled by a simple thermostat or more sophisticated sensor and control panel. Work with your PowerPro representative today to select or replace the right immersion heater.

Electric screw plug immersion heaters can vary in size and features depending on the application. PowerPro screw plug heaters can easily be customized to fit your needs. They will range in output from small wattages all the way up to well over 5 megawatts and voltages ranging from 120V to over 690V. They can deliver up to 1,200°F for heating liquids, oils, gasses, or air in industrial applications, without causing damage. Hazardous area approvals allow our immersion heaters to be installed in a variety of hazardous classified areas such as Class 1 Div 1 and Div 2, as well as IECex and ATEX required designs.

Our screw plug immersion heaters can be controlled by a local thermostat mounted directly on the unit, or via a control panel and temperature sensors wired into your local automation system.

We specialize in replacing your old, inefficient, or damaged screw plug immersion heaters with the highest quality heaters, no matter the existing brand. Replace your old screw plug heaters with PowerPro heaters to optimize your process temperatures and increase efficiency. Call us today to get started.

IMMERSION HEATERS

Maintain Ideal Temperature

Keep your liquid product at safe, workable temperatures for your critical processes.

Preserve Temperature Sensitive Materials

Safely heat and protect a wide variety of liquids and other products.

Easy Process & Installation

We make it Quick and Easy to Replace Your Damaged or Aging Circulation Heaters. We’ll work with your preferred contractors to get the right solution installed.

Safety Certified

Every PowerPro heater is certified to UL/CSA standards and rated for Class 1 Division 2 hazardous areas. They can also be built to work in Class 1 Division 1 environments, ensuring you meet regulatory requirements and maintain workplace safety standards

Get Peace of Mind

Get Peace of Mind with PowerPro Replacement Circulation Heaters. We’ll even store them for you and get them to you within 24 hours when you need them!

Need More Information?

phone 801.506.0198

How Long Have Your Screw Plug Immersion Heaters Been on the Job?

Your Screw Plug Immersion Heaters degrade over time. In fact, within 5 years, your heaters have lost around 30% of their heating capacity. If you've neglected ongoing maintenance, your heaters could be worse off - or even close to failure.

Replacing screw plug immersion heaters in existing applications is our specialty. PowerPro screw plug immersion heaters offer a straightforward solution for your processes. We will work with you to understand your needs and create a made-to-fit heating solution to replace your old heaters. Contact us today for a screw plug heater that perfectly fits your needs.

GET A QUOTE

NEED A COMPLETE, ENGINEERED SOLUTION FOR YOUR PROCESSES?


GET A COMPLETE THERMAL ASSESSMENT