If you live in the Rocky Mountain West, or any region where it gets cold during the winter months, chances are you’ve seen chipping concrete. Have you ever stopped to think what causes concrete to chip? Improper curing, that’s what causes it. But with a good concrete curing blanket, this problem can be completely avoided.
Not All Concrete Curing Blankets Are The Same
If you’ve ever seen chipped concrete before, it’s likely due to cold weather. But we’re not talking about cold weather after the pour. No, chipping concrete often results from it being poured when it was too cold. This means the concrete never fully cured. Thus, it became brittle and flaky. The simple solution to this dilemma is either to wait until its warm enough outside, or else apply a concrete curing blanket.
If you did a search on Google for concrete curing blankets, you’re likely to find a myriad of options. But not all these options are the same. A good majority of the curing blankets out there are merely insulation blankets. Now insulation is a good thing to have in a curing solution, but it’s only half of the equation. The problem with simply insulating the concrete is twofold.
If you have a concrete blanket that only acts as an insulator then it’s not likely to help in the extreme weather. This is the first problem with an insulation blanket. The second is this: with only insulation on your side, you’re not going to be speeding up the curing process at all. When concrete cures, a chemical reaction occurs. This reaction causes the concrete to put off heat. With this in mind, placing an insulated blanket over the concrete will help to keep some of this heat in, but the amount of heat it will trap isn’t substantial enough to help cure concrete in really cold weather, or to speed up the curing process much either.
The Real Solution is Electric
This is why you need an electric curing blanket, or a heated curing blanket, to get the job done right. Electric curing blankets will both insulate and heat the concrete to an ideal temperature for curing. With the characteristics of a heated blanket at play, you can properly cure concrete in very cold temperatures. What’s more, even if the weather isn’t that bad, you can apply such a solution to speed up the curing process by leaps and bounds.
When it comes to picking the best electric curing blanket, there are a few major aspects to be concerned with. Number one, you want to make sure you get a blanket that will evenly distribute the heat throughout the entire application area. If the blanket ishotter in some places than others, you’re not going to get an even cure. Number two, you want to make sure you get a product that is properly certified for safety and efficiency. And number three, you want to make certain you purchase a blanket that can regulate its own heat. A blanket with a thermostatic controller will enable you to apply the heat and walk away without worrying whether it will keep consistent heat for the whole time you’re curing.