Wind Turbine Repair

Wind turbine repair is a highly skilled and specialized line of work. Wind energy turbines represent a significant investment of time, financial, and energy resources for any company. When repairs need to be made, they need to be undertaken quickly to reduce turbine down time.

How Do Wind Turbines Work?

Have you ever wondered how wind turbines work? They look exactly like fans, but actually work in a completely opposite fashion. Fans use electricity to create wind. Wind turbines use wind to create energy. They accomplish this by using the same physical forces surrounding a plane’s wing.

wind turbine aerodynamics

As wind flows over the surface of a turbine blade, the pressure on 1 side of the blade decreases. The difference in air pressure between the 2 sides of the blade create lift and drag. The stronger lift force pulls the blade in 1 direction which causes the blades to spin. The blades attach to a rotor, which attaches to a generator. As the rotor spins the generator, electric energy is created.

Blade Maintenance

Mother Nature subjects wind turbine blades to a lot of stress. This includes bird strikes, lightning strikes, sand blasting, salt corrosion, rain, hail, ice, insects, and more. Erosion and pitting on the surface of the blade can ruin a turbine’s aerodynamic efficiency. When the aerodynamics of a blade are compromised, the turbine’s energy productivity is reduced as well.

Repair In The Field

epoxy curing

After locking the blades in place, turbine repair service companies can reach the damaged area 1 of 2 ways. Sometimes their repairmen repel from the windmill to perform the repair. Another option is to use equipment or scaffolding to reach the repair site.  Wind turbine repair often involves epoxy patch work.


epoxy curing

Work like this has been done for several years now, and more recently, these companies have discovered that the epoxy patches cure stronger if heating is applied evenly across the blade.

Heating blankets distribute heat evenly, rapidly cure epoxy, and cure to a stronger finish. This benefits service companies because they will be able to repair the turbines quicker. It also benefits the wind blade owners, because the sooner the blade is repaired, the sooner the windmill can be put back in use, generating and providing energy.

Curing Problems

Most epoxy resin and hardener combinations require heat in order to cure since ambient temperatures are not high enough. Improper heating during curing of epoxy resins compromises its chemical, mechanical and heat resistance properties.

In cold temperatures, epoxy curing slows considerably. If temperatures drop low enough it will not cure at all. Warming the resin and the hardener before mixing can also help in winter conditions.

On the flip side, excess heat during curing causes bubbles and deformities. Carefully controlled temperatures and even heat without hot or cold spots is critical.

Improperly heated epoxy can also become discolored and yellow. Avoid using forced air heaters to apply heat during curing. Forced air heaters can make the epoxy look cloudy and ruin its glossy transparent finish.

Powerblanket Epoxy Curing Solutions

Epoxy Curing Blankets

Powerblanket epoxy and resin curing blankets use even heat distribution to cure epoxy patch work quickly and easily, and help to eliminate the huge financial burden of replacing entire wind blades. Our blankets are also heavily insulated to protect your cure from heat loss even in the coldest of weather conditions.

epoxy curing

Contact us to find the perfect epoxy curing solutions for your needs at 866.957.5538 or [email protected].

Cure your epoxy resins faster and easier than ever before with Powerblanket.


Alex Pacanowsky

Meet Alex, one of our experts in freeze protection and the head of the custom team at Powerblanket! For the past several years, Alex has worked closely with oil & gas pros, medical device startups, and pharmaceutical suppliers (just to name a few) to create weatherproof operations. No matter how cold the weather, or what needs to be heated, Alex knows just what to do! He also loves mountain biking and spending time with his two boys, 5 and 9, and two Labrador Retrievers.

Resin Curing Temperature

Resin curing + heat. This is something that isn’t discussed too much because, let’s be honest, it’s not a great selling point. The quicker and easier you can get your epoxy to cure the better, right? Resin curing temperature and curing time will vary depending on the mixture and manufacturer. While some systems are designed to ‘cure’ at room temperature, heat must be added for epoxies to reach optimal performance properties. Heat can be added via composite curing ovens, radiant heat, or epoxy curing blankets.

aircraft epoxy resin curing

Types of Epoxy Resin Systems

There are probably several ways to categorize resin systems, but we’ll be focusing on two:

  1. One-part systems vs. two part systems
  2. Systems that cure at room temperature vs. those that require heat.

One-part systems vs. two part systems

While some systems are one part, most resin mixtures require two components. In one-part systems, heat is required to “kick-start” and maintain the curing process. More specifically, temperatures must be maintained around 250°F-350°F for a few hours (specific requirements vary).

Two part systems require the following elements: resin and a curing agent. Mixing the two initiates the chemical reactions necessary for curing.

Resin Curing Temperature: Room Temperature vs. Added Heat

As we’ve briefly touched on, heat requirements for epoxy curing vary from system to system. Quite often, all that’s required of two-part systems is mixing the resin and curing agent; the epoxy or composite is them able to finish curing at room temperature. However, some systems require additional heat. Again, the specific requirements of each system vary and can be obtained from the manufacturer.

Powerblanket Epoxy Curing Blankets allow for even and consistent heat distribution to ensure optimal epoxy curing and performance properties. The blankets are mobile solutions that eliminate the need for expensive composite curing ovens.

Why Add Heat?

epoxy resin curing

Knowing that room-temperature curing is an option, you might ask yourself, “Why would I want to go to the effort of adding heat during curing?” The key phrase here is “trade-off”. Adding heat usually means additional equipment and planning. However, epoxy mixtures that require heat boast the following properties:

  • Chemical resistance
  • Electrical insulation
  • Heat resistance

Hotter is Better!

It’s important to note that all epoxy mixtures (even those that ‘cure’ at room temperature) will technically not fully cure unless heat is added. Properly adding heat to systems designed to cure at room temperature will always boost the performance of the final product. However, curing at room temperature makes more sense when increased performance isn’t needed.

resin curing

Let’s take a quick look at what this looks like in practice. Specifically, let’s look at how adding heat can increase the temperature resistance of a room-temperature cured system. Temperature resistance is measured by Glass Transition Temperature (Tg). Let’s say we have a room-temperature cured composite with a Tg of 100°C (212°F). When the composite is kept at 150°C (302°F), the Tg will increase by approximately 10-15°C (5-8°F). Keeping the product at the temperature for an additional 4 hours will increase the Tg by roughly an additional 5-8°C (1-4°F)


Many manufacturers use heat in a “post-cure” to achieve desired properties. This typically follows two simple steps:

    1. The epoxy is first left to cure at room temperature overnight. This allows the mixture to “gel” before heat is added. When heat is added to early, it can affect the viscosity. Drops in viscosity can cause the mixture to “run” and can lead to uneven texture in the final product.
    2. Heat is applied for a few hours. A good rule of thumb is to keep temperatures 50-100°C above the Tg of the epoxy. This “post-cure” boosts the epoxy’s performance without disrupting the texture or consistency.



Heat: What Are Your Options?

There are a few effective options for adding heat during the epoxy curing process. Knowing the pros and cons of each can help you determine which is best for your needs. 1

1. Curing Ovens

Composite curing ovens are a highly effective option that allow for precise and even temperature control. Additionally, ovens come in a variety of sizes; whatever needs to be cured, there’s an oven that can fit it. However, this option can be expensive to install and cannot be scaled up or down. Additionally, lack of mobility means projects must be transported to ovens for curing. 

2. Radiant Heaters

Radiant heaters are a more versatile and mobile option. They are notably less expensive than composite curing ovens and can be scaled up or down depending on the size of the project. Unfortunately, radiant heaters can cause uneven curing which leads to discoloration, bubbles, and brittle patches.

3. Heating Blankets

Heating blankets provide all the mobility and scalability of radiant heaters with significantly more precise and even temperature control. Unlike ovens, composite curing blankets allow the heat to be brought to the project (vs. transporting the project to a curing oven). This can save significant time and headache. For example, when repairs are done on wind turbine blades, rather than disassembling the turbine and transporting the blade to a curing oven, repairs can be done on the spot.


Powerblanket Epoxy Curing Blankets

Powerblanket Epoxy Curing Blankets utilize top-of-the-line heating technology to ensure even heat distribution throughout the curing process. Additionally, Powerblanket offers custom options; whatever your curing needs, we can help you develop a solution.

Cure your epoxy resin faster and easier than ever before with Powerblanket.

Say goodbye to uneven curing and subpar epoxy performance.

Check Out Powerblanket Curing Blankets


Alex Pacanowsky

Meet Alex, one of our experts in freeze protection and the head of the custom team at Powerblanket! For the past several years, Alex has worked closely with oil & gas pros, medical device startups, and pharmaceutical suppliers (just to name a few) to create weatherproof operations. No matter how cold the weather, or what needs to be heated, Alex knows just what to do! He also loves mountain biking and spending time with his two boys, 5 and 9, and two Labrador Retrievers.

Powerblanket Hot Box and Curing Blankets for Post Curing

When it comes to post curing, maintaining ideal temperature is a must. And if you’re post curing small to medium sized parts, then you may find yourself using expensive ovens, or else taking a whole lot of time and money to build your own. Thankfully, you don’t need to do either of these with the Powerblanket Hot Box on hand.

Post Curing: Bring the Heat

Post curing is a process during mold making that consists of increasing heat to a mold after the initial curing phase. Doing so allows the mold to cure faster, as well as enhances the physical properties of the mold. During post curing, heat must be evenly transferred to the mold at a constant rate as to not interrupt the natural curing process and cause irreversible damage. These damages can cost time in redoing the mold and in money for having to use extra materials.

The best way to heat molds during the post curing phase is to use an insulated hot box. Hot boxes provide regular, even heating to materials that require protection from low or fluctuating temperatures.

The Powerblanket Hot Box

Powerblanket’s Hot Box (sometimes referred to as a Bulk Material Warmer) works great at maintaining the needed temperature for post curing small to medium sized parts. These insulated heating boxes provide an even spread of warmth to give the mold the exact increase of temperature desired.

The Hot Box’s durable construction allows for secure and lasting installation, while its ease of setup makes it transportable and storable. The Powerblanket Hot Box can be easily assembled, disassembled, and reassembled. It gives you the option of bringing your parts to the Hot Box or bringing the Hot Box to your parts. Our Hot Boxes hold product at a temperature of up to 120° F, and the optional adjustable thermostatic controllers allow temperatures to be controlled with precision.
So if you need to keep your epoxy cures at temperature for prolonged periods of time, a Powerblanket Hot Box just might be the thing for you.


Powerblanket Hot Box pallet warmerOur Premium Hot Box (HB64PRO-1440) Offers:

  • A larger footprint (48” x 48”)
  • An internal steel frame (48” internal height)
  • The highest wattage (1440 Watts)
  • A controller for precise temperature regulation


heated curing blankets
Post Curing with Powerblanket Curing Blankets

Of course, after talking about the Hot Box, you may be thinking, “Yeah, but what if what I need to cure is bigger than 48” x 48?” Well, there are two simple answers to this question. Depending on your application needs, we could build a custom size Hot Box for you. But if one of our resin curing blankets would work better, we would certainly suggest this as an option.

A Blanket for Every Business

If you have curing needs that go well beyond what our Hot Boxes can handle, in regard to size and temperature, then our curing blankets are the ideal answer. Our high-temp flat blankets have high watt densities and produce higher temperatures for post curing epoxies and resins that require ranges beyond 100° F – 120° F, up to 400°F.  What’s more, these blankets can be made to cover large areas simply and effectively.

If you need it heated, Powerblanket has a solution for it. Whether it’s carbon fiber construction, wind blade repair, floor coatings, or some other resin post curing application, Powerblanket has all the options you need to consider paired with a team of world renowned engineers to ensure your project specifications are met. For more information, call 801.506.0198 or visit [email protected].


The Powerblanket Hot Box is the perfect solution for your bulk material heating needs.


Shelby Thompson

Shelby Thompson is the head of standard product sales for Powerblanket. He has a distinguished military career, having served in both Afghanistan and Iraq. In his time in the Marines, Shelby acquired an impressive skillset that he now uses in his current role. When he's not working, Shelby loves spending time outdoors with his wife, son, and daughter. He is also a semi-keen hunter, fair weather fisherman, and shooter. Unfortunately, Shelby also has something of an unlucky streak when it comes to Fantasy Football at the company.