Keep Propane Tanks from Freezing with a Propane Tank Heater

If you rely on propane for year-round operations, then you already know what a headache winter weather can be. If you have a cold propane tank as a result of dropping temperatures, you’re going to lose a lot of efficiency. Thankfully, there’s a simple solution to keeping your propane tank from freezing, and the solution is something some refer to as a propane tank blanket.

 

Keep Propane Tanks from Freezing with a Propane Tank Heater 1

Propane Performs Best Under Heat

Did you know that propane can freeze up completely if the ambient temperature drops below -44° F? Granted, -44° F is pretty darn cold, but in terms of gases, it’s a rather high freezing point. As cold as this temperature is in general terms, there are regions North America that experience extremes within this range and even lower, and if you operate a propane tank under these conditions without freeze protection, catastrophe is inevitable.

Worst-case scenario aside, propane-tank efficiency will fall substantially as the temperature drops, even if it never plummets as low as -44° F. As the temperature drops, so does the pressure in your propane tank, and the pressure in your propane tank coincides with the volume of propane you have to work with. As pressure drops, not only will the volume of your propane deplete, but your extraction rate (how quickly and smoothly you can extract propane from the tank) will suffer as well. If you don’t have a heating source to assist in the pressure maintenance of your tank, then you’re going to have to keep it as full as possible in order to keep it working, even if temperatures are mildly cold.

 

Keep Propane Tanks from Freezing with a Propane Tank Heater 2

More On Propane Extraction or Pressure Rate

Cold weather is the most common dilemma facing propane-tank failure, but it isn’t the only one. Another cause of propane tank freezing has to do with the rate of extraction, or the pressure rate. If you’re drawing out a substantial amount of propane from your tank in a short amount of time, then you could cause the tank to freeze and ice up. This is assuming, of course, that you don’t have a heat source to assist with the problem.

Filling your propane tank more often isn’t going to solve a problem like this. And to be quite frank, it’s only a Band-Aid for cold weather dilemmas as well. No, the only real solution to both problems mentioned here is to keep your tank at the ideal temperature, regardless of outside forces. The safest, most efficient way to do this is to employ an external heating system that both insulates your tank and adds regulated and controlled heat to the exterior service.

In the case of heating propane, SAFETY IS MOST IMPORTANT. Propane, as we’re sure you know, is a highly flammable gas, so using any old make-shift solution isn’t safe. On the other hand, using a heating solution design specifically for the process, one that is certified and pronounced safe by reputable, third-party testing laboratories is the only way to go. With that said, let us introduce you to the Powerblanket® Propane Tank Heater.

 

Keep Propane Tanks from Freezing with a Propane Tank Heater 3

Powerblanket® Propane Tank Heater

Powerblanket has the best propane tank heating solution on the market. And we aren’t just saying that because we are Powerblanket. No, we’re saying it because we know of no other company that puts more thought, time, and testing into such a product offering.  Our heating blankets will help maintain pressure and efficiency on just about any size tank.

What’s more, if your tank isn’t the common propane unit, well, that’s no problem. Our custom approach to heating solutions can tailor a blanket to fit your specific dimensions and needs. In addition to this, and most importantly, our product is safe! All Powerblanket heating blankets are certified with ETL certification to the highest standards of safety and efficiency.

Keep Propane Tanks from Freezing with a Propane Tank Heater 4

Benefits of Powerblanket Propane Tank Heaters:

  • Increase performance and efficiency of propane tanks
  • Provide even heat distribution
  • Save money by optimizing gas and material usage
  • Safety certified by UL/CSA/CE
  • Eliminates unnecessary cylinder refills in cold weather

 

[call_to_action_2 style=”1″ header=”Propane Spec Sheet” content=”Download the Propane Spec Sheet Today” buttontext=”Download” background=”#FF0000″ background_hover=”#FFFF00″ url=”http://go.powerblanket.com/propane-tank-heater-product-slick-download” target=”_self”]

 

OR

Learn more about how to care for your propane tanks with our complete propane guide:

Propane Tank Guide

Smart Freezer Controller

Imagine the food we could save during the various stages of the supply chain if we used smart freezer controllers to monitor temperatures.

Smart Freezer Controller

smart freezer controllerFood loss and waste is a global issue, with loss/waste occurring at all seven steps in the supply chain from farm to table.  

  1. Farming
  2. Post-harvest and Packing
  3. Process and Distribution
  4. Retail and grocery store
  5. Food service and restaurants
  6. Households
  7. Disposal  

According to a Wall Street Journal article written in 2012, the United States alone tends to waste $165 billion in food each year.  While there are many factors along the way that contribute to this giant loss, temperature control plays an important role.  

 

The Role of Temperature

In many instances, temperature is the culprit in food loss.  When food traveling from the farm to the market is in a truck with unregulated temperatures, food can arrive at the grocery store spoiled and be immediately discarded.  If an industrial freezer/fridge door is left open for too long, the temperature can rise enough to render the food unfit for consumers.  If equipment on a freezer/fridge fails all of the contents can be lost before anyone notices. A smart freezer controllsmart freezer controllerer can warn you before spoilage occurs when used in post-harvesting and packing, process and distribution, retail and grocery stores, and foodservice and restaurants–that is four steps in the supply chain.  Even relatively small differences in temperature can mean loss: up to almost 20% globally. “In developed countries, food losses from the absence of refrigeration account for nearly 9% of total food production, and 23% on average in developing countries” (Shaw).

 

The Cold Chain

A cold chain is a temperature-controlled supply chain. An unbroken cold chain in the food industry is an uninterrupted series of refrigerated production, storage and distribution activities and associated equipment which maintain a given low-temperature range.  A functioning cold chain is critical to the protection and delivery of fresh and frozen perishable foods. “In parts of the world where the cold chain is established and run effectively, perishable food loss can be maintained as low as 2%. When applied properly and consistently, a fully functioning cold chain can successfully prevent and reduce food loss” (Shaw).

However, breaks in the cold chain occur due to a variety of issues, including: operator error, insufficient precooling, poor loading practices, inadequate insulation, improperly functioning refrigeration equipment, or even something as simple as cargo or walk-in cooler doors being left open too long. Any of these breaks can cause damage to perishable foods with exposure to conditions that are too warm or cold, all leading to food loss/waste.

 

Save Food Save Money

Powerblanket has teamed with Beacon Controls to develop a connected temperature controller. This new, smart controller allows you to monitor and control your device from your smartphone or computer. More importantly it allows you to receive text, email or push notifications when the temperature goes outside limits that you specify.  Imagine the food you could save with a warning when something goes wrong and time to act before food starts to spoil.  Commercial refrigerators and freezers used in grocery stores and restaurants use controllers.  Replace your freezer/fridge controller with Beacon smart freezer controller and receive a notification when the temperature of your equipment falls out of the assigned threshold.  

Benefits of Beacon Smart Freezer Controller:

  • Compatibility with a wide variety of heating or cooling devices
  • Change settings locally or connect remotely so you can keep your operation running smoothly wherever you are.
  • Customizable alerts based on temperature, electrical current,  and voltage give you complete peace of mind.
  • 120/208/240V AC options, directly switch up to 24 amp loads

portable keg cooler

Sources

Gunders, Dana. “Wasted: How America Is Losing Up to 40 Percent of Its Food from Farm to Fork to Land ll”. NRDC Issue Paper. August 2012. 1 March 2017. www.nrdc.org/sites/default/files/wasted-food-IP.pdf

Plumer, Brad. “How the U.S. manages to waste $165 billion in food each year”. The Washington Post.  22 August 2012. www.washingtonpost.com/news/wonk/wp/2012/08/22/how-food-actually-gets-wasted-in-the-united-states/?utm_term=.5476832ffe73

Shaw, John and Mark Beasley. “IMPROVED COLD CHAIN MANAGEMENT IS KEY TO REDUCING FOOD LOSS”. Food Logistics. October 2016. www.sensitech.com/assets/articles/flog10161415coolinsightsrgbz.pdf

 

Beacon Smart Temperature Controller

Smart Temperature Controller

In today’s connected world the “Internet of Things” (IoT) allows you to turn your lights on and off from your smartphone, see who is at your front door from your desk at work, or get an alert when your garage door is left open, among many other things.  The beacon smart temperature controller is ready to give you

 

Meet Beacon

The Beacon Smart Temperature Controller brings the IoT (Internet of Things) to industrial temperature control. It has the same features as many single stage, electronic temperature controllers plus many added benefits made possible by internet connectivity. For example: monitor conditions remotely and change settings remotely through a web portal or mobile app, recieve alerts when temperatures reach user defined thresholds, set alerts to be sent when settings are changed.

 

Remote Control and Monitoring

Control and monitor your system remotely. Check on current conditions and adjust setpoints, differentials, and other details related to your control system.  Control and monitor boilers, chillers, refrigerated warehouses, beer and beverage coolers, tank, valve, drum and tote heaters and many more systems.

 

Peace of Mind

Define your own temperature thresholds and leave the system unattended with confidence. The Connected Temperature Controller will alert you of any problems, whether you’re present or not.

 

Maintain Historic Data

Beacon’s Connected Smart Temperature Controller allows you to keep historic temperature data for long-term reference or process analysis. A log of electrical current lets you analyze the duty cycle of your cooling or heating equipment and the operating cost.

 

Additional features

  • Change settings at the physical device or anywhere with an internet connection
  • Customizable alerts based on temperature, electrical current, voltage, resistance, etc.
  • Connect to the internet through Wi- Fi or Cellular (coming soon!) networks
  • Create multiple users with varying access control for added security
  • NEMA 4x enclosure
  • Optional timer mode: easily set up an operating schedule by day and time (coming soon!)
  • Optionally switch load based on ambient temperature in addition to material temperature, for example, freeze protection applications (coming soon!)
  • Heat or cool
  • Backlit LCD display on device
  • Adjustable short cycle delay for refrigeration equipment
  • 120/208/240V, switch up to 24 amp loads
  • Options for secure interface with existing control systems

beacon-01

 

 

Beacon Smart Controllers: How Would You Use Beacon?

Beacon Smart ControllersFor many years Powerblanket has offered Johnson Controls A419 temperature controllers with our products that require adjustable or precise control, like our drum and tote heaters. Now, we are excited to introduce a new smart controller with all of the temperature control functionality of the A419 PLUS internet connectivity, which gives our customers the ability to do a lot of interesting things. Remote control and monitoring, temperature logging over time, and customer defined alerts are just a few features included in this new line of smart controllers.

With Beacon Smart Controllers, you can control and monitor multiple devices in one place via our web portal (browser) or mobile app. You can also group the Smart Controllers together, with the ability to change the settings and notifications for entire groups or individual devices. Beacon Smart Controllers make Powerblanket heating solutions state of the art and take your processes to the next level.

Now the question is: how would you use a Beacon Smart Controller? Leave your comments, ideas, and questions. We want to hear from you!

 

Standout Features of Powerblanket Smart Controllers:

  • Check in on your devices remotely; see temperature, electrical current, setpoint, differential and other values and how they have changed over time.
  • Make changes without being physically at the device. Change setpoint, differential, anti-short cycle delay and other settings from your smartphone or computer.
  • Provide notifications and alerts via text message, email or push notifications(i.e. temperature out of range; settings changed by other user, cold boot-power reset; heartbeat-“alive” notifications; electrical current and temperature samples; relay status [on/off/changes]; keypad activity)
  • Set it and forget it. Be confident that you will receive a notification when temperature or other values go outside thresholds that you define, no need to constantly verify operating conditions.
  • Offer connectivity to WiFi, or Cellular networks.
  • Easily restrict access to settings both at the device and remotely. Lock the keypad to be sure your settings aren’t changed.
  • Allow for multiple user accounts with local logins, providing read-write and read-only access options for more refined access restriction
  • Offer electrical current measurement and tracking over time (Beacon Smart Controllers give you the ability to measure current consumption and estimate cost of operation.)
  • Each controller has 2 temperature probes, control and ambient, and provides control algorithm choices using one or both temperatures.

 

Learn More

Powerblanket® Specialty Gas Cylinder Heaters and Semiconductor Manufacturing

 

Powerblanket Specialty Gas Cylinder Heaters for Semiconductor Manufacturing

Powerblanket® gas heating products maintain specialty gas flow rates during semiconductor manufacturing.

It’s important for everything to be precise with the semiconductor manufacturing process. Contamination, temperature variance, and other variables can ruin the process. Powerblanket® products can play a vital role in maintaining specialty gas flow rates during semiconductor manufacturing.

Semiconductor Manufacturers Must Keep Gases Flowing Consistently by Maintaining Gas Temperature in Delivery Systems

Each semiconductor manufacturer has its own precise processes and carefully controlled conditions for producing semiconductors.  Many of these processes involve heating specialty gases to a precise temperature and maintaining the gas delivery system temperature throughout the operation. If the temperature of the specialty gas were to drop by as little as two degrees, the entire manufacturing process could be compromised.

While temperature isn’t the only factor, gas flow rates, are heavily dependent on temperature. Maintaining the temperature in the gas delivery system at the precise degree allows for consistent flow rates and uncompromised accuracy and consistency.

How Do Powerblanket Gas Cylinder Heating Products Help to Maintain Specialty Gas Flow Rates?

When it comes to the semiconductor manufacturing industry, Powerblanket products have a lot to offer.  Our specialty gas cylinder heaters and specialty gas tank heaters allow for precise and consistent temperature control. When paired with a temperature controller, Powerblanket specialty gas cylinder heaters can keep any gas, at the proper temperature for as long as needed.

A Short Case Study on Powerblanket and Gas Flow Rate Maintenance during the Semiconductor Manufacturing Process

A large semiconductor manufacturing company was searching for new products to improve their semiconductor manufacturing process. They needed to maintain their gas flow more precisely, and their existing solution (silicone heaters) was not consistent enough.

Powerblanket designed a specialty gas heating product that maintained the precise temperature and flow rate for hydrocarbon gases that the company was looking for.

The Company’s management team later mentioned that they were against the idea of switching to the Powerblanket specialty gas heating solution when it was proposed to them. They said, “We didn’t think it would work because it was half the power of the status quo product, but after we gave it a try, we were immediately sold…It’s a fantastic product and the sales and engineering support we received was excellent”

Applications for Powerblanket Specialty Gas Heating Products

  • Heating hydrocarbon gas safely
  • Heat argon
  • Heat ammonia
  • Heat carbon dioxide
  • Heat hydrogen chloride
  • Heat chlorine
  • Heat oxygen
  • Heat helium
  • Heat hydrogen
  • Heat hydrogen bromide
  • Heat nitrogen Trifluoride
  • heat propylene
  • and many more specialty gases….

Learn more about the benefits of using Powerblanket specialty gas heaters to maintain gas flow rates

Heated Art from Powerblanket

That’s right, heated art. If you’re not familiar with it, we’re not surprised. In fact, we’d only be surprise if you knew what it was, because it’s an entirely new concept, straight from the brains here at Powerblanket.

 

heated art space heaterHeated Art?

If the name leaves room for explanation, that’s alright. That’s exactly what we plan to do here. In the next couple paragraphs, the term “heated art” will seem all too obvious and familiar. Imagine this, if you will: your favorite art hangs on the wall in your office, adding a metaphoric warmth to your room. Actually, the essence and beauty of it almost seems to add real warmth to the space around you. Well, almost wasn’t good enough for us, so we took it one step further.

Now, imagine that same artwork providing real warmth to your room. How on earth is that possible, you ask? Through radiant heat and Powerblanket’s patented blend technologies, that’s how. You see, Powerblanket is using the same technology behind our industrial heating solutions to provide heat in another space. With Powerblanket’s safe and reliable heat distribution technology behind favorite artwork, you can add heat to an entire room safely, efficiently, and asthletically.

When the furnace just isn’t quite enough, people often resort to using space heaters to add additional warmth to a specific area in their home or office. But space heaters take up room on the floor, and cause a potential hazard in more ways than one. For this reason, many employers won’t even allow them to be used in their buildings, and you don’t want them around in your home either.

Powerblanket heated art steps in to solve this dilemma and more. Not only is our heated art safer, it’s more efficient too. It’s well known fact that radiating heat works better than blowing it. Forced-air heating elements like space heaters add warmth less efficiently than radiant heat units. But along with this is the simple fact that space heaters are nowhere near as nice looking as Powerblanket heated art. To be quite frank, a space heater is an eyesore.

On the other hand, Powerblanket heated art allows you to add warmth and beauty to any space. With a wide range of preselected artwork to choose from, you can find something to complement any room in your home or your office space. Additionally, you can also send us your favorite artwork for a custom heated art project. Either way you approach it, you’ll be glad you’ve taken this route over any other.

 

Powerblanket Heated Art offers:

  • 500-1000 watts of radiant warmth (able to heat an entire room)
  • Ideal for a bedroom or an office
  • A safer and more aesthetically pleasing alternative to space heaters
  • Radiant heat technology (more efficient than forced air)
  • The perfect holiday gift

 

Heat your space with beautiful, safe, and efficient heated art this season, and all in time for Christmas too. Reach out to us today to learn more (a.316.6324).

 

[call_to_action_2 style=”1″ header=”Call Today To Order” content=”888.316.6324″ buttontext=”Learn More” background=”#b12227″ background_hover=”#FFFF00″ url=”http://heartwarmersprinting.com/” target=”_self”]

Product Spotlight: The Powerblanket 400 Insulated Band Heater

Remember the recent blog post on the new Powerblanket 400 series? Well, whether you read that post or not, it’s time to highlight a specific product offering from that family: the Powerblanket 400 band heater. And yes, it’s a hot item.

 

Powerblanket 400 Band HeaterPowerblanket’s Approach to Band Heaters

If you’ve read much about our technology, especially as it relates to our drum and barrel heaters, then you’ve probably come across some mention of the inadequacies of band heaters. We often talk about how superior our heating blankets are to the traditional band heater. And it’s for good reason too. The traditional band heater simply can’t produce the same efficiency as your industrial heating blankets can. With that said, it may surprise you to learn that Powerblanket produces its own band heaters.

In reality, when we say Powerblanket band heaters, particularly the Powerblanet 400 insulated band heater, there’s no reason to be surprised. This is because we don’t produce traditional band heaters using traditional heating technology. No, instead, we’ve created a unique and innovative approach that will outperform any other band heater on the market.

The problem with a normal band heater is that they heat inconsistently. The use of a common band heater will produce hot and not-so-hot regions of heat in your drum or barrel. Because they have no thermostatic controllers band heaters just keep on heating, and this can easily scorch or burn the product you’re trying to heat. This isn’t the case with the Powerblanket 400 band heater, however. Our patented blend of technologies offers even and regulated heat distribution.

Additionally, traditional band heaters are also unsafe. The hot metal band that is a band heater is exposed to everything around it, which means if anything touches it accidentally, it’s going to burn—including human flesh. Powerblanket 400 band heaters, on the other hand, are fully insulated with a durable silicone-coated, fiberglass shell that keeps the heat where it needs to be and nowhere else. This means they’re safe, even if you were to touch it on accident.

 

Powerblanket 400 Band Heater Features:

  • Increases your heating capacity, up to 400° F
  • Made with a durable and safe silicone-coated, 2nd generation fiberglass shell
  • Provides an insulated layer to keep heat in and offer safety
  • Provides more even heat and more precise control over the heating process
  • High efficiency aluminum heat-spreading technology spreads heat efficiently
  • Comes in 120 V and 240 V options
  • Easily setup with our programmable logic controllers (PLC)

 

Learn More

Higher Temperature Heating Solutions Now Available

Have you been awaiting higher temperature heating solutions in the Powerblanket line? Well, if so, your wait is over. The new higher-temperature, Powerblanket 400 line is now available!

 

Powerblanket 400 Insulated Band HeaterWhat 400 Offers

So what makes Powerblanket 400 different from the standard line of Powerblanket products? Increased heating capabilities, that’s what. The Powerblanket® 400™ industrial heating blankets offer new high-temperature abilities for industries that need higher heat application.

Powerblanket 400 heating blankets are able to reach higher temperatures than the standard Powerblanket product line. How high, you ask? If you guessed 400° F, you’d be right. The increased heating capabilities of the Powerblanket 400 heating blanket come as a result of increased wattage and high temperature aluminum heat spreading technology. With 300 watts per square foot of surface area, these blankets deliver a lot of heat. These blankets offer high-powered, high-temperature heating for jobs that need oven-like temperatures.

Like so many other Poweblanket models, the new Powerblanket 400 products come in both 120 volt and 240 volt models. Our Powerblanket 400 band heaters are the safe and efficient alternative to traditional silicone band heaters, and our Powerblanket 400 custom options allow for a tailored approach to your specific project. Our proprietary blend of technology has long set us apart from our competition and has enabled us to provide the best, most even heat distribution on the market. Now, with the Powerblanket 400 product in the arsenal, we’ve added to our technological heating approach. The Powerblanket 400 series makes use of high-efficiency aluminum heat-spreading technology, creating increased heat density and a completely even distribution of heat.

But it doesn’t stop there either. These new heating blankets also include silicone-coated, 2nd generation fiberglass shells. These fiberglass shells are extremely durable and flame retardant. Where other silicon heat solutions are known to be somewhat unsafe in hazardous conditions, Powerblanket 400 heaters are as safe as all our other products. Since the silicone shells are insulated, there’s no risk of burns or flames if they’re touched by a hand or an unexpected spark. All these features have allowed us to create a solution fit for many heave duty projects, such as resin curing, welding conditioning, manufacturing processes, and much more.

 

Learn More

Custom Heating Solutions: What You Need to Know

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more can all benefit from innovative temperature regulation year round. And hey, that’s what we do.

 

Custom Heating BlanketsCustom Heating vs. Ready to Ship Products

Powerblanket® produces an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of our company’s greatest contributions to the industries we serve is the ability we have of producing custom heating solutions for just about any project under the sun.

We’re in November now, and many are thinking about the effect cold weather is going to have on their business continuity. Some will search high and low and feel frustration at the lack of solutions that fit their very specific need. If you’re reading this as one of those frustrated individuals, then take courage, because we specialize in this sort of thing.

Sometimes the word “custom” makes a process sound like it’s going to take a long time and cost a boatload of money. With some manufacturers, that may be true, but our manufacturing and customization process is fluid and effective, meaning that we can turn around a custom product in a reasonable window. In the case of Powerblanket, you can expect to be wowed.

So whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, then Powerblanket is ready to help.

 

Custom Heating Solutions from Powerblanket Offer:

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

 

Learn More

The Hot Box Now Comes in 3 Options

If you know about our Bulk Material Warmer (also known as the Powerblanket Hot Box), then know how handy it can be when it comes to keeping your materials warm and protected from freezing temperatures. However, what you may not have known is that this savvy product now comes in three different performance levels.

 

Product Spotlight- Hot BoxGood Better Best

We recently expanded on our tried and true Hot Box heating solution in order to provide variable offerings for varying use cases. We realize not every job needs the most robust, durable, and powerful product in order to offer efficiency and economic heating capabilities. So with this in mind, we set out to create a good-better-best approach to the Powerblanket Hot Box product line.

The Powerblanket Hot Box (also referred to as a Bulk Material Warmer) is now available in three different performance levels to accommodate a wider range of heating needs. When we first introduced their Bulk Material Warmer, it was immediately implemented among our customer base as a viable and helpful solution for bulk material prep and protection.

Take Vern Fiehler, of Quick Road Repair in Alaska, for example. Vern was one such individual who benefited substantially from the Powerblanket Hot Box. Prior to the inception of the Hot Box, Vern was using a forced-air, ceramic heater to bring his Instant Road Repair (IRR) product up to working temperatures. But the use of this heating solution burned his product during a presentation in front of a group of decision makers for the Juneau Alaska International Airport. Shortly after this setback, Vern discovered our Hot Box and has used it ever since.

Whatever bulk material warming you may be in need of, you can benefit from the security, efficiency, and safety of our Hot Box heating solution, just like Vern did. Whether you need a little or a lot of heat, whether you need durability or extreme durability and regulatory heat, we have the right box for you. With our Powerblanket Lite, Powerblanket, and Powerblanket Premium options, you can get portable, storable, and reliable heating to protect your assets, whatever they are.

[call_to_action_2 style=”1″ header=”The New Hot Box” content=”Now in 3 Performance Levels” buttontext=”See the New Features” background=”#b12227″ background_hover=”#b12227″ url=”https://www.powerblanket.com/bulk-material-warmers-hot-box/” target=”_self”]

Powerblanket Programmable Logic Controllers

As innovative as our industrial heating blankets are on their own, how cool would it be if you could monitor them all from a central location? Well, you can. With the new Powerblanket Programmable Logic Controllers (PLC) you can keep track of all your blankets and see exactly what’s going on with each.

 

These PLCs are the Bee’s Knees

What makes these PLCs so great is the monitoring capability you have with them. A programmable logic controller is an industrial computer control system that continuously monitors the state of input devices and makes decisions based upon a custom program to control the state of output devices. Sounds pretty wow, right? But just in case that was a little too much tech talk for you, here it is in plainer English…

Using Powerblanket PLCs on Powerblanket products simply means that you can monitor and regulate all the temperatures in all your blankets (both the temperature inside the blanket and the temperature on the surface of the blanket). What’s more, you can make needed adjustments on various blankets or various zones of a single blanket too.

However, like all your products, these PLC systems aren’t just a one-size-fits-all solution. They’re entirely scalable. This means you could set your system to measure just one temperature zone, and set it to switch only one blanket based on that temperature. Or you could have your system set to measure 200 temperature zones for 100 different blankets. There’s no upper limit to the number of temperatures or blankets you can monitor and switch with these PLC systems.

Here’s an example of just how helpful these PLCs are. A particular blanket could be set to switch based on a specified internal temperature, so it doesn’t damage itself, while simultaneously, it can be set to maintain a certain surface temperature for curing something like an epoxy resin, for example. You could also set a group of multiple blankets to switch based on a maximum combined temperature or even the average of their temperatures.

 

Control Options

Temperature measurements aren’t the only control options these PLCs are capable of, however. Your blankets can be set to switch based on a schedule. This means you can set the temperature to ramp up to a certain level at a certain rate, then stay there for a certain amount of time, and slowly taper off or shut off completely. This allows you to set your blankets to automatically turn on at a predetermined time in order to prepare your material as needed, before workers arrive, perhaps.

In addition to schedule and temperature controls, you can also set alarms to be triggered if certain conditions are met. For example, if you have power failure, reach a temperature outside of your specified limits, experience circuit shorts, or a number of other similar dilemmas, you can set your blanket to automatically shut off, scale back on temperature, or produce an alarm.

In addition to this, all the data recorded in these protocols can be logged for record keeping or future analysis. The temperature, relay state (blanket on or off), current, voltage, etc. can all be recorded and sorted for your data needs. And all these PLCs can be set up for remote monitoring or remote control.

 

[call_to_action_2 style=”1″ header=”Powerblanket PLCs” content=”Control Your Assets” buttontext=”Learn More” background=”#FF0000″ background_hover=”#FFFF00″ url=”https://www.powerblanket.com/programmable-logic-control-systems” target=”_self”]

Higher Temperature Powerblanket® Products Now Available

Have you been awaiting increased heating capabilities in the Poweblanket line? Well, if so, your wait is over. The new higher-temperature, Powerblanket 400 line is now available!

 

Powerblanket 400 Band HeaterWhat 400 Offers

So what makes Powerblanket 400 different from the standard line of Powerblanket products? Increased heating capabilities, that’s what. The Powerblanket® 400™ industrial heating blankets offer new high-temperature abilities for industries that need higher heat application.

Powerblanket 400 heating blankets are able to reach higher temperatures than the standard Powerblanket product line. How high, you ask? If you guessed 400° F, you’d be right. The increased heating capabilities of the Powerblanket 400 heating blanket come as a result of increased wattage and high temperature aluminum heat spreading technology. With 300 watts per square foot of surface area, these blankets deliver a lot of heat.  These blankets offer high-powered, high-temperature heating for jobs that need oven-like temperatures.

Like so many other Poweblanket models, the new Powerblanket 400 products come in both 120 volt and 240 volt models. Our Powerblanket 400 band heaters are the safe and efficient alternative to traditional silicone band heaters, and our Powerblanket 400 custom options allow for a tailored approach to your specific project.  Our proprietary blend of technology has long set us apart from our competition and has enabled us to provide the best, most even heat distribution on the market. Now, with the Powerblanket 400 product in the arsenal, we’ve added to our technological heating approach. The Powerblanket 400 series makes use of high-efficiency aluminum heat-spreading technology, creating increased heat density and a completely even distribution of heat.

But it doesn’t stop there either. These new heating blankets also include silicone-coated, 2nd generation fiberglass shells. These fiberglass shells are extremely durable and flame retardant. Where other silicon heat solutions are known to be somewhat unsafe in hazardous conditions, Powerblanket 400 heaters are as safe as all our other products. Since the silicone shells are insulated, there’s no risk of burns or flames if they’re touched by a hand or an unexpected spark. All these features have allowed us to create a solution fit for many heave duty projects, such as resin curing, welding conditioning, manufacturing processes, and much more.

 

[call_to_action_2 style=”1″ header=”Powerblanket 400″ content=”Read More About Powerblanket 400″ buttontext=”Learn More” background=”#FF0000″ background_hover=”#FFFF00″ url=”https://www.powerblanket.com/Powerblanket400.” target=”_self”]

Methane Hydrates: A Dilemma for the Pipeline Industry

Sometimes the word methane carries with it a negative connotation, but if there’s a word or combination of words to trump it, it’s “methane hydrate,” at least if you’re in the piping industry that is. While methane hydrates can be found naturally occurring in the deep abys of the ocean bottom (and could serve as a good energy source) when it comes to gas lines, there’s nothing good to say about them.

 

Methane Hydrates

What are Methane Hydrates?

In terms of simplicity, a methane hydrate is a combination of methane gas and water. When these two combine at freezing temperatures, they form a solid methane hydrate. Interestingly enough, these crystal-like rocks form naturally at the depths of the sea. And in cases of potential energy sources, well, methane hydrates could be a thing of the future. However, when it comes to the piping industry, these rocks just plain get in the way.

 

Methane Solids in Your Pipes

In the case of the piping industry, methane hydrates can put a stop on gas flow like plaque can put a halt on blood flow in our arteries. When natural gas passes through piping equipment at temperatures near or below freezing, the buildup of condensation and the contraction of gas molecules create these gnarly solids we’ve been talking about. When these hydrates buildup in pipelines, especially at transition points like valves, manifolds, and instrumentation, they can pose a substantial risk to continued operation. In fact, they can outright stop it in its tracks.

So what’s the solution? It’s a simple one. It’s heat. Adding heat to a pipeline can keep temperatures at the ideal level and will entirely prevent the formation of methane hydrates. When adding regulated and even heat distribution to your equipment in the form valve heaters, manifold heaters, and instrumentation heaters, hydrate formation is no longer a problem. Thankfully, this is one of the major areas Powerblanket assists the piping industry with. Our valve, manifold, and instrumentation heaters offer the easiest and most efficient solutions to heat maintenance on a natural gas or liquid pipeline. So if hydrate formation is a dilemma that keeps you up at night, reach out to Powerblanket today, so you can start sleeping better.

 

Valve Heaters

Viscosity Maintenance With the Proper Heating Solutions

Though the beginnings of winter are still a ways off, it’s certainly a matter on all our minds already, especially if you need temperature regulation through the winter. However, drum heaters and barrel heaters aren’t only good for the cold months. In fact, they’re equally important for viscosity maintenance year round.

 

Maintaining Viscosity Levels With the Proper Heating Solutions

Drums Heaters and Barrel Heaters: Year Round Uses

Drum and barrel storage is a convenient way to maintain surpluses of all kinds. And when it comes to storing large amounts of material in such units during the colder months, the proper heating solution becomes imperative. Maintaining the ideal temperature range by using innovative heating solutions can also save significantly on the heating costs that go to your warehousing. But as much as all of this warrants the need for great drum heaters or barrel heaters, it only turns out to be half the equation.

Drum heaters and barrel heaters work phenomenally well for freeze protection during the winter months. However, such technology is likewise helpful and necessary for year-round needs, such as viscosity maintenance. The patented approach behind Powerblanket® heating blankets is actually used for a wide range of heating needs.

Harnessing the ability to heat your liquids in the same container you store them in is a significant convenience, timesaver, and money saver.  Often times, manufacturers have to store products in a container entirely separate from those in which they heat the product. Of course, this means that you have to move the stored material from the storage unit into whatever container you use to heat it. In many manufacturing processes, this could represent a time-consuming step. Think, then, how great it would be if this was something that could be altogether avoided with the use of drum or barrel heaters.

Regardless of what temperature-sensitive material you may be storing in your drums or barrels, if it needs to be heated for viscosity maintenance for proper manufacturing, then adding heat is a very important step in your preparations. And there’s no better way to add the heat than using Powerblanket insulated heating blankets?

Powerblanket drum and barrel heaters are simple to install, remove, and reinstall as needed, making the storage and transportation of temperature-sensitive product as efficient as possible, and making viscosity maintenance a snap. What’s more, Powerblanket patented technology offers the most efficient heat distribution on the market. To make a long story short: if you’re in need of viscosity maintenance, look no further than Gordo Sales. We’ve got you covered with Powerblanket heating solutions.

 

Powerblanket Features:

  • Powerblanket heaters work with both steel and poly containers
  • Full wrap-around design provides complete insulation and ensures equal heat distribution
  • Drum warmers deliver safe, uniform heat to expensive materials without overheating or burning
  • Drum heaters design decreases and prevents product waste among temp-sensitive materials by maintaining consistent storage temperatures without significant fluctuations
  • Highly energy-efficient GreenHeat Technology™ and design lowers energy-related expenses and overall project and equipment costs

 

More About Gordo Sales

Gordo Sales has been in business since 1989. We are a small family-owned company with a very specialized line of products. We only sell high quality products that involve Industrial Process Heating and the control of such heaters. By being so specialized, we are able to provide a level of help and expertise that we could not otherwise provide. THE NEEDS OF OUR CUSTOMERS ARE OUR FIRST PRIORITY, if we know of a product or solution that is best for our customers, and we do not handle that solution ourselves, we will send them where they can find it, rather than trying to sell them something that is not as good for their application.

We strive to ship items we have in our inventory the day they are ordered. The vast majority of orders ship same day, sometimes even within 15 minutes of placement. We know you, our customers, require and deserve a level of service that requires us to do ALL WE CAN to make your transaction with us a pleasant one.

We are here to serve you; just let us know how we can do that.

 

Gordo Sales

Protect Your Agricultural Assets With Custom Heating Solutions

Forbes ran an article yesterday from Thomas Landstreet about the potential collapse in agricultural pricing. These estimations come at the cost of corn, pork, and beef especially. But whichever way the pendulum swings in the near future, one thing’s for certain: those in agriculture will need to safeguard their precious assets, and this could mean applying the proper custom heating solutions to help keep operating costs low.

 

The Agricultural Outlook

Protect Your Agricultural Assets With Custom Heating Solutions

According to Thomas Landstreet’s article on the matter, we should expect to experience a considerable drop in prices for the agricultural sector (that’s bad news) something Mr. Landstreet refers to as a retrenchment. So why the retrenchment, you ask? Well, according to Landstreet, there are two major factors that will contribute to the impending slide of the agricultural industry. One of them is something its faced time and time again, and that’s drought. Apparently the drought we passed through back in 2012 has created what Landstreet calls a bubble, one that he thinks will pop soon.

The second factor that is set to cause problems in the agricultural space is the ethanol mandate that allocated 40% of corn to creating an alternative fuel to petroleum. The effect of less corn going toward food supply has also contributed to the nearly bursting bubble. Whether the bubble bursts anytime soon or not, one thing is pertinent for the industry, and that is asset protection.

 

The Powerblanket® Contribution

If prices are to drop in the agricultural sector, then those involved in the industry are going to need to save on operating expenses where ever they can. Additionally, it’s going to be imperative to safeguard capital and resources. In the spirit of such, Powerblanket offers a myriad of possibilites in custom heating solutions for the agricultural space. So whether you need to keep large water tanks from freezing, propane storage at the ideal temperature, or DEF storage working in cold weather, Powerblanket has you covered.

Powerblanket custom heating solutions offer the most cost-effective and efficient heating solution on the market. With our patented approach to heating, we can ensure even heat distribution over the entire service area of application. What’s more, in case of temperature-sensitive storage maintenance, Powerblanket heating solutions actually add efficiency to the equation, such as in the case of ourpropane tank heaters. Add to this our revolutionary smart controllers and our new 3D scanningcapabilities, and Powerblanket becomes the clear choice.

 

Download Propane Spec Sheet

Powerblanket® Outperforms Heat Trace

When it comes to maintaining and protecting the precious valves and instrumentations on your pipes or pipeline, Powerblanket valve heaters and instrumentation heaters outperform the best heat trace. If that seems like a bold statement, read on to find out how and why.

Powerblanket® Outperforms Heat Trace

Heat Trace vs. Powerblanket

Heat trace, often times referred to synonymously astrace heating, is a common form of providing heat and freeze protection to pipes and pipe valves, manifolds, and instrumentation. Trace heating (TH) has been around for a long time, but the cons associated with the technology are still present today. While TH offers a great solution for long stretches of pipeline sitting above ground, it certainly has its limitations when it comes to protecting valves, actuators, and instrumentation from cold weather.

One potential downside or setback related to TH installation is the requirements that come with its use. If a company is going to install TH on their piping system, they’re going to have to hire a certified electrician to do it. This translates into more time and more money. What’s more, once it’s installed, it’s permanent, whether it gets in the way or not. And while TH works well with metal piping instruments, due to the conductive nature of the material, it doesn’t work with anything else.

Benefits of the Powerblanket Solution

TH amounts to installing heated wires to the external surface or your pipes and instrumentation, but this isn’t the best option when it comes to protecting your assets from the cold. Applied heat, and insulation are what’s needed, and TH only offers conductive heat. Powerblanket valve heaters and instrumentation heaters, on the other hand, offer the best combination of both. With Powerblanket, you can easy install, uninstall, reinstall our rugged vinyl blanket to add an insulated wrap of direct heat to keep your instrumentation at the ideal temperature, regardless of the weather.

In addition to this, Powerblanket instrumentation heaters offer the most consistent and efficient heat distribution on the market. With our patented technology and proprietary blend of materials, Powerblanket heaters provide even and regulated heat distribution throughout the entire surface area of application. What’s more, our custom approach makes our technology available to fit the biggest, smallest, or most uniquely shaped instruments around.

So whether you’re looking to protect small, large, or oddly shaped instrumentation, look no further than Powerblanket.

 

Learn More

Product Use Case: Drum and Barrel Heaters for Viscosity Maintenance

Powerblanket® drum heaters and barrel heaters have uses beyond mere freeze protection. For example, viscosity maintenance, a year-round problem, is easily handled by one of our ready-to-ship or custom built solutions.

 

Product Use Case- Drum and Barrel Heaters for Viscosity Maintenance

From Freeze Protection to Heating Applications

One of the primary concerns we hear of from individuals and companies ordering our drum heaters or barrel heaters is the need for adequate protection against freezing temperatures. While this is a huge part of what our solutions offer, it’s not the only trick in the hat. You might actually be surprised to find that Powerblanket technology is used for a myriad of heating needs. And one of those has to do with viscosity maintenance.

Regardless of what you’re storing in your drums or barrels, if it needs to remain at high temperatures to maintain a certain level of liquidity, then you need to pile on the heat. The problem is that often times manufactures or operators don’t have a simple means of adding heat to their storage. The procedure, then, usually involves moving the stored liquid from a storage unit to a heating unit. However, this extra, time-consuming step is NOT necessary if you have a good drum or barrel heater.

Powerblanket drum and barrel heaters are easily installed, removed, and reinstalled for convenient storage and transportation. What’s more, Powerblanket technology evenly distributes a regulated flow of heat, preventing the problems associated with band heaters. So if you’re in need of viscosity maintenance, look no further. We’ve got you covered.

 

Powerblanket Features:

  • Our heaters work with both steel and poly containers
  • Full wrap-around design provides complete insulation and ensures equal heat distribution
  • Drum warmers deliver safe, uniform heat to expensive materials without overheating or burning
  • Drum heaters design decreases and prevents product waste among temp-sensitive materials by maintaining consistent storage temperatures without significant fluctuations
  • Highly energy-efficient GreenHeat Technology™ and design lowers energy-related expenses and overall project and equipment costs

 

Learn More

Concrete Curing: Not Just a Wintertime Problem

If you’re in the business of concrete, then you know that winter poses the most complications when it comes to proper concrete curing. However, you’ll be equally aware of the fact that summertime also has its challenges.

 

Concrete Curing- Not Just a Wintertime Problem

Summertime Concreting

Sure, winter is a far more difficult time to deal with when pouring concrete. Proper curing involves ideal temperatures, and winter imposes on these ranges more than any other season. That’s why when it comes to pouring concrete in winter, you need the assistance of a good concrete curing blanket. But what can be done to counter the challenges of summer, and what are those primary challenges?

In the summer months, you don’t have to worry about freezing temperatures. Instead, you need to watch for levels of relative humidity, temperature fluctuations between night and day hours, and an increase in the water demand for concrete curing. With these factors to consider, careful monitoring of the concrete is still an important element of the job. Hotter temperature and low humidity can increase the need for additional water, and large fluctuations between the daytime and evening temperature can pose significant problems too.

If there is the risk of a rapid drop in temperature, then there is the risk that your concrete could crack. Even though the temperature may be ideal for curing during the day, that doesn’t mean it will be at night. Certain regions can experience significant temperature variances between daytime and evening hours, and these variances should be considered potentially problematic.

 

Using a Concrete Curing Blanket in the Summer?

It may seem a bit of a stretch to suggest the use of a curing blanket during the summer months, but the reality of the situation is that it can be a very reasonable call. Think about the potential scenario of dropping temperatures at night. If your concrete is curing well during the heat of the day, and then experiences a drastic drop in temperature at night, then it’s going to affect the cure and even cause potential cracking.

Using a concrete curing blanket at night would allow you to regulate the temperature range even if it’s dropping. This would produce a more uniform cure and would also speed up the process significantly. The blanket likely wouldn’t be needed during the day, but applying it at night could greatly decrease the fail rate of an expensive and time consuming project.

 

Download Spec Sheet

Heat Tape—And the Better Solution

Heat tape (or heating tape, as it’s sometimes referred to) is a way you can implement low-key freeze protection for your exposed pipes during the winter. In fact, this handy technology can even be used to safeguard instrumentation and other devices that are left out in the cold. However, as savvy as this approach sounds, did you know that there is a much better solution?

 

Heat Tape—And the Better Solution 1

Heating Blankets Bolster Safety and Efficiency

Heat tape has its uses in very small applications, but in most scenarios, it can be like putting a Band-Aid on a broken bone. Such a technology offers direct heat only where the tape contacts the pipe or apparatus on which it’s placed. When used on metal pipes, the heat exchange is bound to spread, merely because metal is an obvious conductor of heat. With this in mind, then, we can see another limitation in the freeze protection offered by heating tape; it can only be used on heat conductive surfaces.

Aside from this, another problem with heating tape is the simple fact that it offers only heat. Such an approach provides no insulation against the cold. Insulation on its own isn’t enough; that’s for sure. But neither is heat. Instead, the proper combination for free protection and temperature regulation is the combination of both. And this is where heating blankets come in.

 

Heat Tape—And the Better Solution 2

The Better Heating Solution

Now that we’ve sufficiently covered all the shortcomings of heating tape, we can address the characteristics of a far better solution. That far better solution is heating blankets, or heat blankets. Heat blankets are a combination of heat-distribution capabilities married with durable insulation for a myriad of industrial and commercial applications.

In the case of Poweblanket®, we offer a revolutionary and patented approach to heating blankets. Our durable vinyl shells are capable of insulating assets in temperatures as low as -50° F. What’s more,Powerblanket heating blankets offer the best and most efficient heat distribution on the market. So if you have valuable material or equipment to protect from the effects of cold weather, give us a call today.

 

Download product catalog

 

A Drum Blanket Done Right

Of all the heating devices out there for the protection of drums and barrels, there’s one drum blanket that’s done right. With even heat distribution and temperature regulation, Powerblanket has a solution fit for any occasion.

 

A Drum Blanket Done Right

The Powerblanket Difference

Storing materials in drums is a simple idea. They hold a lot and offer a durable storage structure for liquids, chemicals, food product, and so much more. However, when it comes time for temperature regulation, they don’t provide any capabilities on their own. For this reason, some manufacturers have created elaborate insulation blankets to ward off the effect of cold temperatures. As much as these insulation blankets may seem to be a good idea, or as much as they might be able to help with a mild difference in temperature, they can’t adequately protect against extreme winter cold.

In addition to inadequately protecting your materials against savage cold, traditional insulation blankets also lack the ability to bring material to working temperature. Take, for example, the need for bringing certain types of product to temperatures above the ambient air around it. A typical insulation blanket has no way to accommodate this.

However, Powerblanket has created a drum blanket that can work in a myriad of applications. It can protect your most temperature-sensitive products against the coldest cold. What’s more, the Powerblanket drum heater also has the ability to bring your product up to working temperatures. With a thermostatic controller and innovative heat-spreading technology, you can wrap your drum and forget about it.

The ability to automate your freeze protection is a huge benefit once the cold weather rolls around, and the capability of bringing liquids and other products to higher temperatures for viscosity maintenance, chemical-property enablement, or characteristic integrity is of equal importance. So whether you need a drum blanket for insulation, temperature regulation, or a combination of the two, Powerblanket is the clear answer.

 

Download Product Spec Sheet two lines

Winter Preparation: Now’s the Time

As the temperatures around the nation rise into the hundreds, cold-weather preparation may be the furthest thing from your mind. What’s more, there are plenty of warm-weather applications that Powerblanket technology is used for. But we would be completely remiss if we didn’t say enough of proper winter preparation. After all, when it comes to preparing for winter, you don’t want to be a grasshopper…

 

Winter Preparation- Now’s the Time

Aesop’s Fable: The Ant and the Grasshopper

Perhaps you’re already familiar with the old fable of The Ant and the Grasshopper from Aesop. If you’re not (and even if you are) we’ve recited it here. Below follows the most popular English renditions of the story:

“In a field one summer’s day a Grasshopper was hopping about, chirping and singing to its heart’s content. An Ant passed by, bearing along with great toil an ear of corn he was taking to the nest.

‘Why not come and chat with me,’ said the Grasshopper, ‘instead of toiling and moiling in that way?’

‘I am helping to lay up food for the winter,’ said the Ant, ‘and recommend you to do the same.’

‘Why bother about winter?’ said the Grasshopper; we have got plenty of food at present.’ But the Ant went on its way and continued its toil.

When the winter came, the Grasshopper found itself dying of hunger, while it saw the ants distributing, every day, corn and grain from the stores they had collected in the summer. Then the Grasshopper knew it is best to prepare for the days of necessity.”

Of course, the implications of this story can go far deeper than the need for good winter preparation. But for the sake of comparison, the story’s plot is rather poignant for the industries we serve. When cold weather does hit, it’s best to already have the systems and products you need in place to brave the effects of winter. So if you have assets to cover come late October, now’s the best time to start getting together the protection you’ll need.

 

Download product catalog

Epoxy Curing For Boats and Other Water Craft

To many people, summer means time on the lake or in the ocean boating or jet skiing. But have you ever stopped to consider how boats and other water craft are built? In almost every case, the high-tech water vessels of today use some form of fiber construction and epoxy curing.

 

Boats

Epoxy Construction on Water Vessels

Not everyone stops to think about how their jet ski was built when their speeding across the lake at 40 mph. Nor do many think about the same sort of thing as they’re sitting in their finely crafted boat, fishing or watching friends or family water ski. But such a thought is certainly worth addressing, even if it’s long before or after all the fun is over.

Unless you’re out enjoying the water in an older, traditional wooden or aluminum boat, you’re likely sitting in a piece of modern engineering, the type that involves high-quality plastics, glass fibers (sometimes referred to as glass-reinforced plastics – aka: fiberglass) and on some occasion, even carbon fiber. Most boats and jet skis these days are built using such composite materials. And where such composites as these exist, there’s also the need for some heavy-duty resins.

Composites such as fiberglass and carbon fiber are bound together using high-grade epoxy resins. These resins both bind and coat the material in a hard, nearly impervious shell—making for very strong construction. For those familiar with epoxy curing, it’s apparent that the primary challenge is temperature. Most epoxies cure well above room temperature, and when you’re dealing with construction as big as boats, such an endeavor becomes all the more difficult.

Some boat manufacturers take a lot of time and resources to construct large ovens or rooms in which they can pump heated air in order to bring the temperature up to the ideal range for epoxy curing. As you can imagine, such an undertaking requires a lot of patients, not to mention it creates a lot of downtime.

This is why Powerblanket is pleased to offer the boat-manufacturing world a much better solution. With Powerblanket curing blankets, a manufacturer can saves thousands of dollars and hours of time just on one boat build. Our curing blankets allow epoxy to cure at its ideal temperature for as long as needed. What’s more, Powerblanket curing blankets are available in ready-to-ship and customizable sizes and shapes.

 

Learn More

Curing Epoxy Resin On Wind Turbine Blades

Whether it’s for repair or initial construction, curing epoxy resin on wind turbine blades can be a tricky endeavor. However, with the right technology, this arduous process can be a whole lot easier.

 

Curing Epoxy Resin On Wind Turbine Blades

Wind Turbines: A Large Scale Application

The typical wind turbine blade ranges in length from 116 ft. to as much as 148 ft. That accounts for a big hunk of glass-fiber or carbon-fiber reinforced plastic. Either way you look at it, the curing process involved with such a beast is certain to take a lot of space. That’s why wind turbines are often created in pieces and then secured by joints.

Very strong, high-temperature epoxies are used for this process, but as anyone who’s worked with epoxy knows, the proper curing takes some extra heat. Can you imagine building a hot box around the joint of a turbine blade? Better yet, can you imagine having to stick that huge thing in an oven? The idea sounds ludicrous, and it is when you consider that there is a much better way of approaching the problem.

Instead of being left to the need of a hot box or an oven to properly heat cure epoxy resin on wind turbines, you could apply localized heat to the area that needs to be cured. That’s right, localized heat in the form of a revolutionary heat blanket that evenly distributes heat over the entire surface area of application. In addition to the amazing ability this blanket has of transferring heat, it also has the capability to regulate it.

By using thermostatic controllers, you can use such a blanket to cure epoxy at the ideal temperature. It’s simply a matter of setting the temperature range to the proper level for your application and then waiting for it to work its magic. With customization possibilities, this blanket is available in as many sizes as necessary, so you can cure even the largest cure joint. Shoot, you could even cure the whole blade if you want.

 

Learn More

Heat Trace: What You Should Know

When you think of the phrase “heat trace” or “heat tape,” what images come to your mind? Perhaps you haven’t ever heard of these terms before, and now you’re curious. When it comes to heated pipes for protection against the ruthless cold of winter, trace heating is the system by which the warmth you need for your pipes flows. Read here to learn more about the uses and value of trace heating.

 

Heat Trace- What You Should Know

Understanding How it Works

Trace heating does just as its name implies: an electrical surface or wiring is linked to some other surface (whether it be a pipe, flooring, etc) and traces its way along that surface’s path. This, in turn, provides and maintains heat where it’s most needed. Thermal insulation is wrapped around both the supplier of heat and the recipient of heat to ensure stable, permanent warmth. The apparatuses involved with heat trace (also known as heat tape) can vary in size and surface area, depending on the physical dimensions of the application.

 

What Are the Benefits of Heat Trace?

Think of the value of trace heating as twofold—accommodating functionality and increasing throughput. While its prime purpose is to protect and insulate against undesired invasions from the elements (i.e. keeping substances flowing that can solidify or slow in cold temperatures), thus accommodating functionality, it can also be utilized to increase the efficiency of operations. For example, heat trace can drastically improve the throughput of gas transportation and extraction by increasing tank and pipe pressure—being that gas slows as it cools.

Drawing upon the fundamentals of heat trace, Powerblanket uses a patented blend of technologies as a highly efficient and less expensive means of distributing heat evenly over the surface of any application. Whether you need to protect a piping system, valves, manifolds, instrumentation, gas tanks, liquid storage, or anything else from cold weather or depreciation in efficiency, Powerblanket technology can enable you to do so with greater ease and dependability.

 

Download Product Spec Sheet

Ideal Temperature Control for Semiconductor Manufacturing

If you know anything about semiconductor manufacturing, then you know how precise everything has to be. There can be no contamination, no variance in temperature, and no room for error. That’s why Powerblanket® products play a vital role in maintaining ideal temperature for gases used in the manufacturing process of semiconductors.

 

Ideal Temperature Control for Semiconductor Manufacturing

Close Enough Isn’t Good Enough

Every semiconductor manufacturer seems to have their own recipe for producing their product. Whatever the processes, it’s certain to be very particular and stringent in nature. For example, heat-treated gases, purified for various processes in the creation on semiconductors, have to be able to maintain the ideal temperature for the duration of their function.

If a gas were to drop by as little as two degrees, the entire manufacturing process would be compromised. Temperature alone isn’t the only factor, however. Extraction rates have to be bang on form too.  Of course, in the end, extraction rates and flow rates ultimately have to do with temperature. Keeping the temperature of a tank of gas at the absolute perfect degree allows for consistent flow rates and uncompromised accuracy.

 

The Powerblanket Role in the Matter

The application possibilities of Powerblanket products are more than meets the eye. At least, we could say they’re more than the common person would think of upon first consideration. That’s why examples such as these are exciting for us to share. We love learning from our customers and sharing the myriad of applications and processes our products serve.

In regards to semiconductor manufacturing, our blankets allow for tight and regulated temperature control. With thermostatic controls built in, Powerblanket tank blankets can keep any gases, liquids, solids, or any combination at the proper temperature for as long as needed. So remember, if you can haul, build, truck it, or ship it, Powerblanket can cover it…literally.

 

Learn More