Prevent Valves from Freezing

Custom Powerblanket Pipe Heaters

Cold weather has the ability to shut down your entire piping system if not properly mitigated. Pressure valves, flow meters and other temperature-sensitive components are especially prone to freezing. What steps should you take to prevent valves from being vulnerable to the cold?

Thawing Versus Freeze Prevention

It is easier to find a method of freeze protection rather than to thaw a valve that is already frozen. It takes a lot more energy to thaw a solid than it does to warm it enough to avoid freezing. Stop valves from freezing by not letting them get cold enough in the first place. 

Valve Freeze Defense

The best way to avoid valves from freezing is to apply a direct source of consistent heat. When pipes and valves freeze up, it can cause some down time along with additional costs for damaged valves. Begin taking precautions by seeking out parts of your system vulnerable to freezing. 

Identify Sensitive Equipment

Valves are particularly prone to freezing up when the temperature drops too low. So are pressure monitoring equipment and other flow controls on your pipe system. These areas should be regularly checked to ensure there is no buildup of water moisture or frost, as these are key indicators of the early stages of pipe freezing. This is especially important if you currently are not using any kind of heat source to prevent your equipment from succumbing to the cold.

Avoid Operating in Cold Temperatures? Yeah, Right

Regardless of what is flowing through the pipelines, avoiding damage means to avoid freezes, especially during the times that the pipelines are not flowing. However, this is not always feasible. Operating in cold weather is always inevitable. It’s best to be prepared to deal with the potential for freezing valves instead of hoping it will never happen to your equipment. 

Options for Keeping Valves Ice Free

There are many ways to prevent valves and other freeze-prone equipment from heading too far into the cold:

  • Draining and bleeding pipelines and valves
    • Works great in your home or commercial sprinkler system, but this may not be feasible in all operations. Some pipelines run continuously, and cannot afford to be shut down to empty them of fluids.
  • Electrical Heat Trace
    • Though heat tape is efficient at melting ice and keeping cold away from temperature sensitive equipment, using this type of warmer can limit access to valves.
  • Building temporary housing/heating units
    • Constructing a shelter over valves and other parts of your pipeline can take time, material and labor away from other parts of your operation. Then there is always the potential that such housing can collapse in high winds. Plus, you have to rebuild it every time you need it.
  • Temporary heating solutions such as propane or space heaters
    • The key word here is temporary. In most environments, it won’t be cold year round. However, propane and space heaters are less safe to use due to the potential to ignite flammable vapors that might be emitted from pipe leaks. They also don’t provide an even amount of heat, much of which dissipates due to no surface-to-surface contact between the heater and the valve.
  • Heating blankets or heating wraps
    • This is the preferred option, which is explained in more depth below.

Heat Your Pipes With Heating Blankets valves

Only one method of freeze mitigation can truly protect control valves. To prevent valves from freezing, heating them is recommend. A safe electrical heating source is the best way to go. You need to be able to control the temperature safely and evenly to avoid damaging valves or the contents inside pipes.

Finding a solution with an even distribution of heat is also important to avoid hot and cold spots. The best product on the market today for heating or thawing valves would have the following features:

  • Easily installed or removed
  • Easy access for monitoring and maintenance
  • Even and efficient heat
  • Meets current safety standards
  • Available in standard and custom sizes
  • Durable for year-round cold weather use
  • Flexible for storage during the warmer seasons

Find a solution and get it installed before the cold season begins. When searching for an answer to potential valve freezing problems, look for a cost effective solution that can be easily maintained and installed without the costs of additional labor and monitoring. 

Powerblanket Valve Heaters

Powerblanket heating blankets are the number one valve heaters available anywhere in the world. Manufactured in the frozen heights of the North American Mountain West, these insulated heated blankets perform in temperatures well below freezing. Custom Powerblanket pipe heaters can go even lower, keeping pipes warm even in places as cold and remote as the Arctic Circle. Powerblanket enhances operational functionality of tanks or flow systems by wrapping around and heating the exposed valves preventing critical cold weather related problems, thus reducing unnecessary costs related to shut-downs and repairs.

For more information about Powerblanket valve heaters, contact our temperature control specialists by calling 866.945.4203. or by email at [email protected]


Product Spotlight: Pipe Heater

TITLE
0
access_time
style Pipe Heater

When cold weather hits, your pipes are some of the first victims. Dropping temperatures will alter the viscosity of fluids, often causing buildup and restricting flow. The less fluids flow, the more delays you’ll have while waiting for the pipes to thaw. When this happens, you’ll need some kind of pipe heater.

Bring the Heat

There are many ways to ensure pipelines stay warm in the winter:

  • Cover pipes with insulation
  • Blow hot air on pipes via space heaters
  • Propane flame torch (avoid this if at all possible)
  • Wrap pipes with insulated electrical wire, such as heat tape
  • Use a heat lamp
  • Pre-install a heated blanket

Our advice to anyone considering pipe-thawing methods is this: don’t. Several of the above suggestions are inherently dangerous, even though they can be seen regularly in homes and construction sites. Even items like heat tape have been proven to be unsafe for winter pipe heating: it was reported in a Washington Post safety alert that heat tape is responsible for 2,000 fires, 10 deaths and hundreds of injuries annually. 

It doesn’t make sense to work at solving a problem when you can prevent it from ever occurring in the first place. Instead of attempting to thaw frozen pipes, keep your pipes from freezing before the freeze even happens.

Pipe Heater

“Piping Hot” Pipe Heater

Powerblanket knows how inconvenient, expensive, and unsafe frozen pipes can be. That’s why, along with our valve, manifold, and instrumentation heaters, we also provide a product for that important element in between. After all, it’s just as important to keep the pipes themselves from freezing, regardless of what type of fluid you may be pumping through them. With this in mind, check out the Powerblanket Pipe Heater, or Heated Pipe Wrap.

Features and Benefits

The Powerblanket Heated Pipe Wrap harbors the same patented technology used in all Powerblanket heating products. This technology, along with its seamless implementation into an easy-to-use and durable blanket, saves labor costs and downtime through simple and fast installation, uninstallation, and reinstallation. It’s also the safest solution, with all of our blankets built to UL/CSA/SE standards.

Protecting fluids from freezing in harsh outdoor environments is what Powerblanket is all about, and Powerblanket pipe heaters make this a real possibility for your pipes or pipeline.

Our Pipe Heaters offer:

  • Savings in labor costs and downtime through easy installation, uninstallation, and reinstallation
  • Freeze protection down to -40°F/-40°C
  • Ready-to-ship sizes, available in multiple lengths and diameters
  • Preparation of pipes for the proper curing of coatings
  • Certification to UL/CSA/CE standards

See all the details of the Powerblanket pipe heater by downloading the free product spec sheet. For more information about pipe heater blankets, click here.

 

Download Spec Sheet


Custom Heating Solution

TITLE
0
access_time
style Drum Heater

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid

Need Custom Heating for Your Equipment? Answer These Questions

Do you need custom heating for a specific and unique application? Although there are various standardized heating solutions available, to determine the right solution, either standard or custom, a few initial questions need to be understood. The first of the discovery questions is to identify the desired result of the application which is generally one or a combination of the following:Custom Heating

  1. Freeze Protection:  Generally to protect from the elements or cold climate
  2. Temperature Maintenance:  Maintain a specific, constant and optimal temperature
  3. Added heat or Increase Temperature:  Add heat  and Increase temperature higher from starting point

For example, a pipe heating application may require higher energy/wattage to thaw a frozen pipe and then settle to a moderate power/wattage for continual freeze protection and flow control long term.

An epoxy/composite curing application may require pre-heating at higher temperatures prior to the epoxy being applied and then maintained at a higher temperature for optimal curing.

Begin with These Steps

  • Gather as much information as possible using the Custom Application Questionnaire. Be thorough.
  • The dimension needs to be as built, not a CAD drawing .  ALL dimensions must be submitted to the custom team for quote.
  • Once quote is accepted and PO is sent, engineering will begin.
  • Custom products will normally be completed within two weeks.

Custom Application Questionnaire

Once we understand the problem, these types of questions reveal the best solution:

  1. Which of these best describes the system requiring Cooling: drum/bucket, tote, tank, gas cylinder, pipe, flat surface (vertical or horizontal?), other?  
  2. Can you provide drawings and/or photos?  
  3. What are the critical dimensions of the system?  
  4. What material is the container or surface made of (i.e. tank wall, drum wall)? How thick? 
  5. What is the substance being Cooled (i.e. water, oil, pipe contents, concrete, frozen ground)? 
  6. Is this a flowing system? If so, what is the flow rate (include units, gpm, cfm, etc.)? 
  7. What is the expected ambient temperature (include units, °F, °C)? 
  8. What is the maximum expected wind velocity (include units, mpg, km/h, etc.)? 
  9. Are there other environmental conditions that may be relevant? 
  10. What is the beginning temperature of the substance or contents (include units, °F, °C)? 
  11. What is the desired final temperature of the substance or contents (include units, °F, °C)? 
  12. What temperature range is acceptable? 
  13. Are there upper or lower temperatures where the substance or contents will be damaged? 
  14. Is there a time frame requirement for the initial cool down? 
  15. What power source is preferred (120, 208, 240, DC)?  
  16. How far away is the power source (cord length)? 
  17. Do you require UL/CSA certified products? 
  18. Is your location considered hazardous (Class I Division 2)?
  19. How many units do you need now and in the future? 
  20. What is the required delivery date? 

Custom Heating Case Study

Powerblanket completed a project for a large chemical company to solve freeze protection problems. The company stores a chemical solution in large 4,000 to 8,000 gallon stainless steel tanks. Their customers live in various climates throughout North America. This solution is water based and freezes at roughly 32°F.  This company needed freeze protection and to maintain regular temperatures between 40°F -70°F.

The question became, “How do we provide a ‘one size fit all’ customized solution for various climates?” Powerblanket created a modular custom design, adjustable by region and tank size, that came in two pieces.

Powerblanket engineers calculated the amount of heat and insulation required to combat freezing temperatures and wind chill to maintain optimal temperatures in these various climates. What appeared to be a complicated application turned into a simple and effective custom solution.

So many industries need heating solutions, and not just during the cold months either. Epoxy curing, chemical storage, viscosity maintenance, food preparations, concrete curing, and much more all benefit from innovative temperature regulation year round. 

Custom Heating vs. Ready to Ship ProductsNeed Custom Heating

Powerblanket manufactures an extensive line of ready-to-ship products designed and engineered for a myriad of purposes. For example, if you store temperature-sensitive materials in drums, barrels, or totes, then our ready-to-ship barrel and drum heaters or tote heaters will accommodate your heating needs perfectly. If you store DEF, then take a look at our DEF heaters. If you have palletized product you need to keep warm, check out our Hot Box.

Along with all these great product offerings, however, one of Powerblanket’s greatest contributions to the industries we serve is custom process heating solution for any project under the sun.

Often “custom” connotes extended lead times and a lot of money. With some manufacturers, that may be true, but Powerblanket’s customization process is fluid and effective.  We turn around a custom product in a reasonable window. Expect to be wowed.

Whether you need a heating solution for a large or oddly shaped propane tank, truck-mounted water cylinders, valves, manifolds, instrumentation, large scale epoxy curing, or any other specific application, Powerblanket is ready to help.

Custom Heating Solutions from PowerblanketCustom Heating Questionnaire

  • A reasonable window for completion
  • The ability to answer varying levels of customization
  • Certification to universal safety standards
  • Easy installation and use

Powerblanket engineers solve every kind of temperature problem from simple to very complex. Our expertise guarantees satisfied customers in a very short turnaround time. Need custom heating for these vessels?

  • Drums / Barrels / Pails
  • Totes to include Diesel Exhaust Fluid Totes
  • Gas Cylinders to include Propane and Specialty Gases
  • Specialty Tanks to include Frac Tanks
  • Water Transfer Trucks
  • Water Storage Tanks
  • Hydraulic Fluid Tanks
  • Vac Trucks
    Need Custom Heating Solution

Industries Powerblanket Serves

With Powerblanket, equipment lasts longer, projects stay on track, and fluids flow smoothly. Use Powerblanket technology year round to achieve total temperature control. Some of the various industries we serve include:

  • Oil/Gas
  • Railroad
  • Sprayfoam
  • Coatings
  • Chemical
  • Piping
  • Valves
  • Instrumentation
  • Food Processing
  • Composites
  • Construction
  • Precast
  • Roofing
  • Industrial
  • Manufacturing
  • Specialty Gases
  • Agriculture
  • Dairy
  • Mining
  • Concrete
  • Public Works
  • Excavation
  • Water Purification
  • Government & DOD 
  • Fertilizer
  • Brewing
  • Fermentation
  • Welding
  • Diesel Exhaust Fluid